Candleholder in Pink
AVF Candle Votives are a unique and special way to light up a room in more way than one. These solid acrylic candle votives have been handcrafted in the USA by skilled acrylic makers. With the faceted sides, these Candle Votives sparkle and shine in every direction. Made to be used with standard metal lined tea light candles (1-1/2" diameter).
*Please note that our Neon Pink color can sometimes look orange depending on the angle you look at it, OR the color that the item is placed upon. It is the nature of the material and not a flaw. We do offer a separate orange color, if you want a true "Orange" OR if you want a softer more sophisticated pink color we offer our "Rose" color.
Dimensions & MSRP
Short: 3" x 3" x 3"h: $165
Tall: 3" x 3" x 4.75"h: $185
PLEASE READ BEFORE PURCHASE AND USE NEVER BURN A CANDLE UNATTENDED OR THAT IS NOT IN SIGHT OF AN ADULT. NEVER BURN A CANDLE NEAR ANYTHING THAT IS FLAMMABLE INCLUDING BUT NOT LIMITED TO PAPER, GASES, FUMES, DRAPES, FURNITURE, CARPETING, ETC. THIS CANDLE PEDESTAL WAS SPECIFICALLY DESIGNED ONLY TO BE USED WITH A GLASS ENCLOSED CANDLE, NO MORE THAN 3” IN DIAMETER AND NO MORE THAN 5” IN HEIGHT. NEVER USE THIS CANDLEHOLDER WITH ANY CANDLES NOT ENCLOSED IN GLASS. ALWAYS READ AND FOLLOW THE TEA LIGHT CANDLE MANUFACTURER’S INSTRUCTIONS CAREFULLY. BE SURE THAT CANDLE PEDESTAL IS PLACED ON A FLAT A STABLE SURFACE SO THAT IT DOES NOT TIP OVER. CANDLES SHOULD ONLY BE BURNED IN A WELL VENTILATED ROOM. NEVER BURN A CANDLE ALL THE WAY TO THE BOTTOM. EXTINGUISH THE FLAME IF IT COMES CLOSS TO THE BOTTOM OF THE GLASS VOTIVE. NEVER REMOVE THE CANDLE FROM THE VOTIVE THAT CAME WITH THE CANDLE WHEN USING ON THIS PEDESTAL. PLACE BURNING CANDLES AT LEAST 2” APART FROM EACH OTHER. USE A SNUFFER TO EXTINGUISH A CANDLE’S FLAME. NEVER EXTINGUISH A CANDLE WITH WATER AS IT CAN SPLATTER THE HOT WAX. It is important that you take proper care of your piece to ensure that it will last a long time without being damaged. It is recommended that you use a suede style chamois polishing cloth and/or a non-abrasive paper towel along with a cleaning fluid stating that it is suitable for use on acrylic.
Do not place your piece on rough or uneven surfaces that can scrape the bottom. If you purchased a printed piece, the bottom of the bowl is sealed with a sealant, but it is not impenetrable
and can be scratched. If a rubber bumper should come off, they can be replaced with similar new ones found at most hardware stores.
Please note that using any products containing ammonia, acetone or lactic acid will permanently damage the acrylic. Periodically, you can polish your acrylic piece to remove fine scratches and bring back the acrylic to its original glossy shine. We recommend using Novus Acrylic polishes and cleaners. You can find this product online or at selected retail stores.
AVF Accessories are not suitable for dishwashers or for use with very hot foods and liquids and should be used in conjunction with the proper serving ware that will not scratch the surface.
AVF Bowls are NOT ASHTRAYS, and should never be used as such. Acrylic is a flammable material. We sell aluminum inserts for our bowls should you want to use it in this manner
AVF Furniture and Accessories are not suitable to be left outdoors or long periods of direct sunlight and should be kept in a temperature controlled environment where high and low temperatures do not go below 60℉ or above 90℉